Let’s look at all the audio interface options for recording so you can decide! USB ![]() No cables or USB adapters are needed! Which Computer Interface is Best? DO NOT use a cable that has an XLR mic cable on one end and a 1/4 inch TRS on the other.Ĭonnecting a USB microphone to your computer is SUPER EASY.Īll you have to do is plug directly the USB cable of your mic into the USB port on your PC.You might also want to get a fathead, an inline microphone preamp that will give you an additional clean gain, so you get better audio quality!.If you’re using an XLR mic that requires high gain, your audio interface can already give you a fair amount of gain.Make sure you turn OFF the phantom power supply switch BEFORE you disconnect your condenser microphone.You can adjust your setup levels again if you still need to. Go to your computer audio input settings and check if th e correct microphone to your computer is selected, then fix the audio setup on the gain knob to your preference. Once the connection of your XLR microphone to your computer is set up, it’s time to fix the settings on your computer. The LED on the audio interface will light up while you’re speaking to the mic. To do this, do a little mic test by speaking to your microphone. It’s best to adjust the volume levels on the audio interface first to your liking before adjusting it on your computer. Check the Audio Interface SettingsĪfter you connect an XLR mic, you want to set your audio levels on the audio interface before it starts feeding the sound to the computer software. You’ll see the LED for the phantom power turn ON. Now to connect an XLR condenser microphone, connect your microphone to the XLR port of your audio interface and turn the 48-volt phantom power button ON.Get the female end of your XLR connector cable to the XLR mic itself, then plug the other end into your audio interface.There are two kinds of XLR microphones, condenser mics, and dynamic mics.Ĭondenser microphones will require a phantom power supply, while dynamic microphones will not. It’s great for every beginner who wants to go serious, from podcasters and audiophiles to professional producers, and it has good customer services! 2. ![]() If you’re new to audio interfaces, you might want to search the Focusrite Scarlett Solo on the internet and check it out. This is because audio interfaces focus on the analog signal to amplify it first before turning it into a digital signal. Using audio interfaces is the best way to MAINTAIN the sound quality of the audio that you record. Inputs for musical instruments (for when you record live events ).USB port that is compatible with your computer.Your PC sound card will not be able to feed the mic all the power it will need. 48-volt phantom power if you’re recording with a condenser microphone.At least 1 XLR microphone input (you’ll need at least 2 to record for stereo).If you’re new to audio interfaces, here are the basic things you should look for: ![]() Yup, that’s all you need to connect an XLR mic to your computer! We’ll walk you through the process step by step! 1. Connect XLR Microphone to PC: Steps to Follow
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |